Name: Platinum Wave
Brand: Segam
SKU: SEG-platinum-wave

Question 1

Will this tile slip when it gets wet?

Accepted Answer

Slip resistance is measured, not guessed. Look for the anti-skid or R-rating row in the spec table on any product page — a higher R number means more grip underfoot when the surface is wet. For a bathroom floor, ask for an anti-skid surface in the wet zone and keep the polished finishes for dry areas and walls. Bring the room measurements to the showroom and we will walk you across the anti-skid range in daylight.

Question 2

Do you have R11 anti-skid for a ramp? The bank wants a slip certificate.

Accepted Answer

Anti-skid ramp tiles are a regular line for us and the R-rating is shown in the spec table on each product page, so you can shortlist before you come in. For the certificate itself: the slip rating is the manufacturer’s test result, so the document you submit to the bank has to be their datasheet or test certificate, not a letter from us. Tell the counter which design you are shortlisting and we will get the manufacturer paperwork for it.

Question 3

Will this fade or get black patches in the monsoon?

Accepted Answer

Black lines along the joints are almost always the grout, not the tile — untreated cement grout holds moisture and grows mould in a Guwahati monsoon. Vitrified tile bodies do not absorb enough water to stain from the inside. Ask for an epoxy or sealed grout and a proper slope so water leaves the floor, and the joints stay clean.

Question 4

How much wastage should I allow for my room?

Accepted Answer

Allow extra beyond the plain floor area for cuts at the edges, for the pattern to line up, and for a small reserve kept back for future repairs. How much extra depends on the tile size against your room size and on whether the layout is straight or diagonal. Bring your room measurements to the counter and we will work the quantity out with you rather than guess it here.

Question 5

Will someone come to my site to measure?

Accepted Answer

Ask the counter on WhatsApp with your location and what is being tiled. Whether a site visit is worth making depends on the job, and they will tell you honestly if it is not.

Question 6

Can a large-format tile be cut down for a feature wall?

Accepted Answer

Large-format tiles are cut down routinely, but the tolerance you get depends on the equipment and on who is doing it — a wet saw in trained hands is a different result from an angle grinder on site. Tell the counter the finished size and the edge detail you are specifying and they will tell you what is realistic for that design.

Brand	Segam
শ্ৰেণী	Vitrified Tiles
জোখ	600x1200mm
Finish	End Carving
ডাঠতা	8.5mm

Platinum Wave

এই ডিজাইনটো যিবোৰ কোঠাৰ বাবে উপযুক্ত

Living Room floor

Bedroom floor

How many boxes do I need?

ক্ৰেতাসকলে যিবোৰ সোধে

ইয়াৰ দৰে আন কেইটামান

উদ্ধৃতি বিচাৰক

Ask us a question